File:Ar.png View history

For Road Types in the editor see Road Types (USA)

Please note UK-specific guidelines can be found here

NOTE: we are in the process of revising the names as they appear in the cartouche. In the near future we will be able to display alternate names for each segment / road, and choose which one of these is the 'common' name.
If you are not sure about changing the name of a road, it is best to ask in the forum or wait until the changes described above are implemented.

IMPORTANT! Due to upgrades in the client, some naming conventions have changed. The altered conventions will be marked with a bolded *NEW*. These changes have now been finalized. Thank you for your cooperation.

NOTE: All roads in our base maps came with the names as defined in the US TIGER dataset.

However, you might notice a few problems with the original road names: Some of the names are not the 'common' names (usually, waze will display the 'name' of the hwy while most people know this hwy by its number)
On other examples, the same highway will have a different name on each side (for example, US Hwy 101 going North, and Bayshore Fwy going South).
Some roads actually have two 'common' names (for example, the NJ Turnpike is also I- 95 and both are relevant names), but currently we can only display one name per road.

For all these issues, we ask that you currently leave the situation as is. We are working on a few fixes, that will automate the proper naming and also allow multiple names for each segments (with a 'Primary' name as the one being displayed, but other names that bring up the same search results).

United States Interstate Highway System

Components of the Interstate Highway System should be denoted as shown:

I-10 E for Interstate 10, Eastbound

I-310 S for Interstate 310, Southbound

I-35E N for Interstate 35E, Northbound (Only I-35E & I-35W in Minnesota and Texas)

Nearly all interstates are divided highways by necessity, and they should be drawn as such in the map for navigational accuracy.

When two or more interstates run concurrently (one stretch of road has multiple route numbers), the segment should be named after the primary of the routes. The primary route will usually have one or more of the following attributes:

• The route whose mile markers are used for the concurrent segment
• The route whose exit numbers are used for the concurrent segment
• When the concurrency ends, the route whose path does not get signed as a numbered exit.

The other route number or numbers can be entered as alt names via the old editor (Cartouche), but shields are currently not being generated for alt names.

United States Numbered Highways

The naming of highways is, of course, somewhat more complex than that of normal roads. Therefore, conventions must be followed to assure consistency throughout the map.

Certain formatting guidelines must be followed to ensure that highway shields are shown in the Live Map and in the client.

US Highways

Federal highways should be denoted as follows. Note that the trailing N, S, E, W directionality indicator is used for highways and interstates which are split into two 1-way segments, per the guidelines.

US Hwy 61 S for U.S. Highway 61, Southbound

US Hwy 90 W for U.S. Highway 425, Westbound

US Hwy 90 Bus S for U.S. Highway 90 Business, Southbound

US Hwy 90 Alt E for U.S. Highway 90 Alternate, Eastbound

US Hwy 199 Spur for U.S. Highway 199 Spur

Use this format and not "US-90" or "US- 90" because this is the format that the Live Map and client will parse.

U.S. Highways will often have local road names (such as Airline Hwy for US 61 and Claiborne Ave for US 90, among others). Use these street names as the primary name for such highways if said name is used for addresses of houses and businesses along the highway.

State Highways

State Highways

The Live Map will parse "State Rte xx" and "State Hwy yyy" and show a sign badge. However, as different states have different naming conventions (and different shields), this is not optimal for ramps. Local naming conventions are preferred for ramps and exits; this will be discussed below. Consistency within each state is key. *NEW*

The same note for U.S. Highways above applies for state highways. LA-308 in Golden Meadow should have "E Main St" as its primary name since that is the name used in addresses of houses and businesses along the highway.

State routes may also be split if it meets the guidelines. Similar to interstates and US highways, state routes are named as follows:

State Hwy 6 for state route/highway 6

State Hwy 99W S for state route 99W, southbound

State Rte 96 for state route 96

County Highways / County Roads

Text to speech on the client will read CR as "County Road." So "CR-10" will be read as "County Road Ten"

Exit ramps and Entrance ramps (on-ramps)

Exit ramps and Entrance ramps are to be set as Ramp road type. The name of the ramp should match the exit or entrance signage as closely as possible. Minimal disparity between sign and instruction is our goal. If done properly, the driver will not have to struggle to compare Waze's on-screen or verbal instructions with what he or she sees in real life on the road.

• If the exit sign shows a number as well as a street or highway name, the exit ramp should be named "Exit 24: Schwarzenegger Rd".
  • A colon has been added because it adds a pause, making Text-to-Speech directions easier to understand.
• If the exit is not numbered, "Exit to Kindergarten Ct" will do.
• If a single exit serves multiple roads, use a slash with leading and trailing spaces: "Exit 32: Terminator Blvd / Total Recall Rd".
• If an exit number contains one or more letters, include it exactly as displayed on the sign: "Exit 33B: Running Man St", or "Exits 35C-B-A: Junior Dr / Twins Ave / Jingle Allthe Way". *NEW*
• Include everything that is present on the last sign prior to the exit. Do not combine all possible pre-ramp signage into the single ramp segment name.
• If the exit off the main interstate or highway serves multiple exits further down the road, it may be advisable not to name the first exit ramp, to name only the ramps which are the first one to a distinct destination. The Waze client will give all the proper exit and keep left or right instructions to guide the driver to the correct exit, even if the first one is not named. That said, this should only be done if the signage for the first ramp is the same as that on the subsequent, named ramp.

For entrance ramps, use this format: "to [street name] [direction] / [control city]", where applicable. For example,

• "to I-10 W / Baton Rouge"
• "to Clearview Pkwy N / Mandeville"
• "to US Hwy 90 Bus W"
• "to LA-1 Thibodaux / Lockport" *NEW*
• Similar to combined exit ramps, when multiple on-ramps combine before merging into the main interstate or highway, it is advised to name the last common ramp with the conventions listed above. This will usually be the last ramp which is the one which actually joins the main interstate or highway.
• Using "Ramp to", "West", "WB", and "Westbound" should be avoided as "WB" is pronounced "double-you bee" and not 'westbound.' Further, the "to" will be automatically omitted from Text-to-Speech instructions. Do not omit the word "to", because this could cause confusion with, say, the "Select entire street" function.
• State highways: When naming ramps and exits that lead to state highways, local naming should be used. This will maximize the clarity of navigation prompts for the majority of users in a given area. *NEW* For example,
  • In New Jersey, highways are generally colloquially referred to as "routes". To distinguish from other (federal) highways, a sign for State Route 45 in New Jersey should say "to State Rte 45". In this case, the abbreviation "to SR-45" may also be used.
  • In Tennessee, highways are generally colloquially referred to as "highways". To distinguish from other (federal) highways, a sign for Tennessee Highway 62 should say "to State Hwy 62".
  • In Louisiana, state highways are generally colloquially referred to as "LA" followed by the highway number. A ramp to Louisiana Highway 308 should be say "to LA-308".
  • In Pennsylvania, state routes are generally colloquially referred to as "PA" followed by the route number. A ramp to Pennsylvania Route 308 should be say "to PA-308".
  • In North Carolina (NC), state routes are generally colloquially referred to as "NC" followed by the route number. A ramp to NC Highway 55 should be say "to NC-55".
• Similar to exit ramps, put multiple destination information, even from multiple signage, onto the single on-ramp name. Major destinations or highways/interstates can be included, but don't go crazy and add every possible town and city in that direction. "to US Hwy 90 Bus W to I-10 W Miss River Br / Baton Rouge" is fine.

New streets

In some cases, there is no prior name since it is a new road that you just recorded. In this case, make sure to choose the proper road type.

Expansion of this section is pending.

Only abbreviations that Waze recognizes should be used within the editor. Since Waze uses TTS (Text-to-Speech) prompting, it is important that the correct abbreviations are used to produce the correct speech output.

Please refer to the following Waze forum for a "work in progress" list of abbreviations that are being tested, currently available and proposed:

http://www.waze.com/forum/viewtopic.php?f=10&t=15178

Also refer to the other various ongoing discussions regarding abbreviations and TTS in the Waze forums.

Basic Rules

Start by following the naming rules for your major roads. Interstate as "I-10 S". US highways as "US Hwy 90". To show that the segments are part of a construction zone, just add the suffix "CONST ZN". "I-10 S" becomes "I-10 S CONST ZN". "US Hwy 90" becomes "US Hwy 90 CONST ZN". In cases with roads that are closed for extended periods it is usually best to disconnect the closed roads from the road network during the construction.

When temporarily re-setting road geometry, closely monitor recent GPS points as the aerial maps will likely display an out-dated view. The GPS points layer may not be up to date either so it's best to have local knowledge of the construction before editing the map. Also, be sure to closely monitor these sections of roadway and remove the CONST ZN suffix whenever the construction is done.

Being in the Waze community of editors means sharing information you discover and learning from the discoveries of others! You can see some of the (old) official sources of mapping information (US only) provided in the forum or check out the (new) Mapping_resources_(USA) wiki page (preferred).

Feel free to add new ones.

Back to Map Editing