File:MapRaidLA.jpg View history

Template:SelectionBar

New editors, please first visit our WME Welcome page.

This is a comprehensive reference guide to the waze map editing interface. Best Practices and tutorials for beginners are available in other articles. Waze Map Editor was introduced in September 19, 2011 to replace the Cartouche map editor, and has been continuously modified since. The Waze Map Editor is officially supported only on the Chrome browser. It may or may not work on other browsers. Template:TOC limit

Begin at http://www.waze.com/editor. Choose the correct part of the world from the top bar.

Either log in or choose practice Mode.

Practice Mode

From the splash screen, click "practice mode". You can try out most of the features of the Waze Map Editor. WME chat will not be available. You cannot respond to map Update Requests. The edit count will not go up, and you will not be able to save.

There are five main areas of the Map Editor:

Top Bar

• The very top-right corner of the window has two important drop-down menus:
  • Language: The language you want the editor interface to display
  • Where in the World: Select whether you are editing in Israel, US & Canada, or the rest of the World

Map Editor Tool Bar

At the top of the Waze Map Editor you will see the main tool bar. It includes the primary control buttons for the editor.

Search box

In the wide search box, you can enter an address, city, state, country, landmark, point of interest, or a combination of those. After hitting Enter or clicking the Find button, you will either be taken to the only result, or be given a list of matches from which to select.

For example, entering "757 Mohawk St, Columbus, OH" will center the map and drop a search marker directly on that address.

However, searching for "main st, new york" is less specific and will therefore give you a list of matches from which to select.

Draw places menu

Hover over this button to show place categories. Choose one and click on the map to add it. This will add a point place. Use the left pane to change it to an area and to change other information about the place. For an area place, use geometry nodes of the place to change its shape.

Draw segments menu

Shortcut keys: i or o

Hover over this button to choose between a single segment and a roundabout.

• i (a straight segment)- Road. Click on the map to start, click to add a geometry node. Double click to end.
• o (a circle)- Roundabout. Click on the map at the center of the roundabout. Drag a circle of the correct size. Click to end the roundabout.

See the Editing Manual Quick Start Guide for more information.

Save Button

Shortcut key: Ctrl+s

The Save button serves two purposes: 1) it displays the current number of changes pending to be saved, and 2) when clicked, it saves all the current changes you have made.

As you make changes, the counter in the Save button increases. The number in the icon is shown to red as a warning that many unsaved changes may be difficult to save if there is a single error among the changes. (This counter is the number of changes you've made which can be undone, NOT the number of edits you get credit for.)

When the button is clicked (or the shortcut key used), the editor saves all of the current changes you have made. This process is a little more complex than this sounds, but that is what it does. In order to save properly, your browser receives messages back from the Waze server in the event of any errors. If there is an error when saving, the editor will try to give you a detailed error message and a suggestion to fix it. The map view will typically try to show the error area highlighted in a bright circle.

Once the save operation completes successfully, you cannot Undo previous changes with the Undo button.

Undo Button

Shortcut key: Ctrl+z

The Undo button will undo unsaved successive previous changes with each click.

IMPORTANT: Once the Save button is clicked and the save operation is complete, the Undo button has no affect on previous changes.

A change can be deleting a geometry node from a segment or renaming a landmark. It can also be a change to multiple objects at once. For example, if you multi-select 25 street segments to change them from No Entrance to 2-way, that is considered a single change. Therefore, one click on Undo will undo that change for all 25 segments.

Redo Button

Shortcut key: Ctrl+Shift+z

The Redo button will re-apply any changes which have been recently undone with the Undo button.

Delete button

Shortcut key: Delete (Del)

The Delete (trashcan) button will delete, or trash, any currently selected objects. If you have multiple objects selected, you will be prompted to confirm the multiple deletion. The only object you can currently multi-select is segments.

Objects are not actually deleted until the Save button is clicked. Once the save button is pressed, you cannot Undo any edits or deletes.

Layers

On the right-side of the toolbar, you will see this icon:

When clicked, it expands to display the layers or object types which are available for display on the main map. When the box next to the layer name is checked, then that layer is active and being displayed. There is a default shortcut key defined for each layer, and to make it easy to remember, with two exceptions: The shortcut is Shift+<first letter of layer name>. The two exceptions are the satellite/aerial imagery, which uses the letter i as the shortcut key for Imagery, and Places which uses the letter L because it was previously called Landmarks.

Refresh or Reload Layers

The small curved arrow at the top right of the Layers list will reload all layers in the current view without reloading the whole page (excluding Satellite Imagery, Cities, and GPS layers). This is a great way to see changes recently made by another editor in the area without losing the Chat history.

Reorder

The six small dots to the left of a layer selector box is a drag handle which enables those layers to be reordered changing the visibility of one layer above another. Only a few layers can be reordered. PLEASE NOTE: The layer order is reversed so layers at the bottom of the list appear above layers higher up in the list. Therefore Satellite Imagery will always appear below all other layers.

Satellite Imagery

Shortcut key: Shift+i

Waze uses aerial and satellite photography provided by Google.

Cities

Shortcut key: Shift+c

City boundaries as defined by segments assigned to that city are shown in different colors. This layer is helpful in finding segments which are set to the wrong city. Until an area is heavily edited an updated, some city boundaries are likely to be overlapping or appear to be unassociated with any segments.

Changing the name of the city for a road is done through the WME interface documented in segment edit detail. If after fixing the city names you still have incorrect city boundaries, review the article on Updating the city layer.

Roads

Shortcut key: Shift+r

Roads are all of the streets, alleys, highways, and freeways which make up the drivable street system in Waze. Depending on the zoom level, some street types are not displayed so that the map is not too cluttered.

GPS points

Shortcut key: Shift+g

This layer will show tracks from Waze users as they drive with Waze running. Waze records and plots the GPS coordinate of drivers. This layer is useful for relatively accurate placement of new or moved roads when aerial photography is not yet updated. GPS points appear in the map editor as colored arrows. The direction of travel for a GPS point determine its color, so that all drivers going the same direction will show their points in the same color. This makes it easier to determine errant GPS points, or where a road on the map doesn't follow the actual path of vehicles.

Area Managers

Shortcut key: Shift+a

The Area Managers layer shows overlapping colored, named rectangles. These areas represent the areas those users have Area Manager permissions. This layer allows you to identify a user you may wish to send a PM in the forums about a specific issue you noticed in their area, but do not have rights to fix.

Places

Shortcut key: Shift+l (L)

Places are also known as POIs (Points of Interest). These can really be just about anything, but tend to be things like parks, gas stations, cemeteries, transit stations, etc. There are two types of Places: Area and Point. Point Places are for most small business, shops, etc. Area Places are for large stores, malls, parks, etc.

See Places for more information on this topic.

(Speed) Cameras

Shortcut key: Shift+s

Speed cameras, red-light cameras and dummy cameras are shown on this layer. Drivers report camera location and type, and a map editor is required to confirm the existence of the camera, precise location and direction the camera is point before it will appear on the client. Confirmed cameras will pop up a visual and audible alert in the Waze app when approaching a speed or red light camera.

See Cameras for more information.

Map Problems

Shortcut key: no default

The Waze servers are constantly analyzing driver's GPS tracks to determine when there might be a problem with the map and uses the Problems layer to alert the editors. Some types of problems tracked are missing roads, incorrect turns allowed at intersection, wrong direction of road.

You can toggle visibility of closed Map Problems by using the "Show/Hide closed" link next to the Map Problems text.

See Map problems for more information.

Update Requests

Shortcut key: Shift+u

These are user-submitted map issues while on the road or from LiveMap. This marker shows the location the user reported the issue from. The user's driven route for a distance before and after the reported location will be shown in bright green. If Waze was in navigation mode at the time of the report, the requested route for a distance before and after the reported location will be shown in purple, with markers along the route with the turn direction given to the user.

You can toggle visibility of closed Update Requests by using the "Show/Hide closed" link next to the Update Requests text.

See Update requests for more information.

Place updates

Shortcut key: Shift+p

The Place Updates layer shows Place Update Requests (PURs) submitted by drivers and beginning editors. When an untrusted driver or editor creates a new place or makes changes to an existing place, a Place Update Request is created. Editors of rank 2 or higher decide whether to accept each request. The most recent requests are a pale pink. Older requests are darker. Accepted but not-yet-saved requests are green.

See Place Updates (Moderation) for more detail.

Editable areas

Shortcut key: Shift+e

Where you can edit is determined primarily by where you have driven. Edit rights are initially granted within a one-mile radius of where you have driven with Waze running. Your editable area is shown in lighter-colored areas surrounded by a black border. Users who are Area Managers will also see their managed areas in a colored highlighted area. See Editable area for more information.

Live Users

Shortcut key: Shift+v

The Live Users layer will display other map editors with the icon above. Editors' locations are shown in real-time.

Road Closures

The Road Closures layer displays a closure symbol and direction on any road that has been closed using the WME road closure feature.

Left Pane

At the left side of the window, below your username, is an area which is both informational and functional. Depending on whether an object is selected, the type of object and how many, different tabs will be available which allow you to view and edit details.

Left Pane with No object selected -- tabs

When no objects are selected on the map, the Tabs Area displays user information. The top section greets you by name and is always visible regardless of what is showing or displayed on the map. Map Problems and Update Requests are not considered map objects, so the tabs below your name will display when a Map Problem or Update Request is selected.

Me Tab

The Me tab displays your map editing permission level and current points for the server on which you are editing (North America or World).

A Wazer with a hard hat displays if you have editing permissions. To the right of that icon will be a highlighted cone with a number. This number is your editing rank. Below those graphics is a sentence about your editing rank and permissions.

Below this information is a graphic inviting you to view the introductory editing videos provided by the Waze team.

Drives Tab

Drives are journeys or routes that you have driven with the Waze client running. While you drive, Waze monitors your journey (recording details like location, time, speed) and transfers this information to the Servers. This data is used to validate the existing map (roads, turns, directions) and to learn average journey times. Other Waze users and Area Managers can also view the anonymous GPS tracks of many users when editing the map in the Waze Map Editor. This helps with map accuracy.

Clicking on one of the five visible entries will center the map along that route and will zoom out to try and fit your entire route on the screen. Routes over about 20 miles / 30 kilometers will usually not fit on the map display all at once due to scale limitations. Use the mouse or arrow keys to pan around on the map. Parts of the route that display in red are not currently paved roads. Consider zooming into that area to determine if a road should be added.

Select the highlighted numbers at the bottom of the tab window to select older routes in date order.

Drives are typically processed and available for viewing in the Waze Map Editor within an hour of completing the drive. For most short drives such as commutes between home and work (under about 35 miles / 50 kilometers), you will likely find them in the editor in under 15 minutes. If the servers are bogged down, or if your drive is significantly longer (over 100 miles / 150 kilometers), these drives may take up to a week to appear. If you don't see your drive after seven (7) days, open a ticket from the Support page, Quick Help box. Use the Email link and fill out the form and submit.

Areas Tab

This shows the entire editable area -- the area in which you can perform edits. Click on your editable area. The view will be centered on the editable area. If your editable area is spread out, in several sections, it may be centered between areas you can edit.

Settings Tab

This feature was added Template:As of

To access user-preference settings in WME, click the "Settings" tab in the left pane. Options include:

• Draw new roads as two-way - determines whether any new road segments you draw start as two-way or one-way
• Draw new roads with all turns allowed - when new roads are drawn with a connection to a junction, the junction can have all "turns" to or from the new segment allowed or disallowed
• Select only on empty selection - affects editor behavior when you select an object (road segment, junction, or place) when there is already an object(s) selected
  • If not checked, then clicking on an object will automatically deselect any other objects already selected. This may cause accidental deselection
  • If checked, you are prevented from selecting a new object if there anything is already selected. Note that multi-select mode allows you to select additonal segments when segment(s) are already selected; use the control key for momentary multi-select, or press the M keyboard shortcut to toggle multi-select mode on/off. Also note that clicking an empty spot can still cause deselection.
• Enable fullscreen mode - when checked, more screen space is given to the map (removes the menu header from the top of the page). Keyboard shortcut Template:Key press toggles this setting.
• Units - Choose between Imperial (feet/miles) or Metric (meters/kilometers)

Left Pane with segment(s) selected

The area above the tabs will show how many segments are selected. The example graphic to the right shows what the Tabs Area looks like when multiple segments are selected and the General tab is in "Edit mode."

Details on these tab settings can be found under Road Properties

General Tab

The General tab displays the segment name and alternate names details at the top. Just below that information is an Edit button. More info on that below. On this tab, you can modify the road type, toll road checkbox, direction, elevation, and lock. Further down past a separator line is more general details about the segment(s) which is/are selected.

Segment Edit Detail

When you click on the Edit button, or tap shortcut key 'e', the General tab changes, displaying more detail information and allows you to make changes to the country, state (US only), city and segment name. Next is where you can add or remove any alternate street name information. An alternate name, technically referred to as a "linked street," is used to capture detail such as the state or US route name of a street as it goes through an urban area where it is commonly referred to with a local name. The local name would be put into the primary name field, but the highway name can be entered as an alternate name. An alternate name street must also have the same city as the primary segment.

Be sure to review the naming convention used in your area before changing names.

If you run into an extreme case where you need to rename the city name on a large number of streets. Review the article Smudged city. The end of the article includes a link to a special form to converting a mass number of segments using the help of Waze staff in the database.

Select Entire Street

When you click the button titled "Select Entire Street," or use the keyboard shortcut Ctrl+a the editor will select all segments connected to the current segment with the same name, city, state, country information. It will also select some segments off the current visible area.

Edit House Numbers

When you click the button titled Edit House Numbers, or use the keyboard shortcut 'h', WME enters the House Number editing interface.

TAKE NOTICE:

• The Edit House Numbers button appears when there is only one segment selected.
• The Edit House Numbers button isn't available to click when there are changes which need to be saved. The message, "Save your changes to edit house numbers" appears below the button.

Add Restrictions

When you click the button titled Add restrictions, or use the keyboard shortcut 't', WME enters the Scheduled Restrictions editing interface

TAKE NOTICE:

• The Add restrictions button appears when there is one or more segments selected.
• If there are restrictions which already exist on any selected segment, the button name changes to Edit restrictions.

Left Pane when a Camera is selected

When a camera is selected, there is a single General tab which allows you to set the alert speed for a Speed Camera, and also to approve the camera once it is placed in the correct location. Red Light Cameras only need to be placed and approved and have no speed set.

Left Pane when a Place is selected

With a Place selected, there are three tabs: General, More Info and Photos. Under the General tab, you set the Place category(ies), give it a name, a description, and a checkbox to lock the place to prevent changes by lower ranking editors, whether it is a Private or Public Place, the full address details, and open hours.		Below that is an address details section which displays the Place's assigned Country, State (in the US) and City. Click the Edit button to change any values and click Apply when complete:
		Setting the proper address details will allow Waze to utilize their own internal search for landmarks which appear only in Waze and not in other search provider results.

Left Pane when a Gas Station is selected

When a gas or petrol station Place is selected, the General tab is very similar to that of all Places. When Gas Station is set as the primary Category (first), then there is an additional drop-down menu to select the Brand of gas sold at this station.

For the Waze application to be as useful as possible to drivers, it is important to ensure all fields of information are fully and properly completed. For more details about completing this data, please see the Gas Stations page.

Map Display Area

All the layers currently selected for display show up in the map display area. The map display areas takes up the majority of the browser window. Any object displayed is selectable and editable, depending on your editing rights in the area you are viewing. Select a street and change its geometry. Select a landmark and change its name. Add a road where one should be, or delete a road which should no longer appear.

There are six main component controls or displays in the corners of the map display area:

Info bar

Just below the main toolbar, there wide area which runs the width of the map display area.

• The left side will display the current city and state (US) or city and country (world).
• The right side displays whether the editor is still loading any layers, such as road images or GPS points.

Zoom Control

Shortcut key: Shift+UpArrow, Shift+DownArrow

In the upper left corner, the zoom control is one way to adjust the zoom level, or altitude, or the map display area. Clicking + will move in closer, showing more detail. Clicking - zooms out/higher and removes detail. You can also click and drag the selector in between the + and - buttons.

The other methods for controlling the current zoom level is covered below in the section on Moving around the map.

StreetView

To Activate StreetView, drag the blue lens icon from under the zoom control to the point where you want to see the street view.

As you drag the lens around the map, it will change colors to indicate the presence of street view images:

• Street View is NOT available here
• Street View is available here

Drop the lens. The map display shrinks by half to make room for the street view pane on the right. The lens has an arrow to show which way street view is pointing.

To spin and and zoom the image, use the pan and zoom controls in the Street view pane, or drag the pane around with the mouse and use the scroll wheel to zoom. To change the street view position, use the arrows on the street in street view, or drag the lens by its small white handle.

All editing operations are still available in the map display pane, but the space for editing is smaller. If you use the house number editor, it will cover some of the street view controls; use mouse and keyboard shortcuts.

To Close StreetView, click the X at the top right-hand corner of the StreetView pane, or press shift-W.

Show my location

. Zooms to the editor's approximate physical location.

Chat window

Top bar

The top bar tells which chat room you are connected to, and allows you to choose whether you will be visible or invisible in the map display area and the editor list.

Editor list

All visible editors in this chat room are listed with their editor rank. Click the editors' username to jump to the editor's location.

Message box

When you are visible, type your message in the message box to participate in chat.

Bottom Bar

Wiki link

Opens a new tab to the wiki map editing pages.

Forum link

Opens a new tab to the Waze map editor forum

Status link

Opens a new tab to the status blog -- showing latest tile updates and any other status messages the Waze team might choose to post.

Keyboard shortcuts

Opens a "pop-up" showing all the keyboard shortcuts that can be typed into the browser window.

Scale

In the lower right corner is a small graphic showing the current scale of the map display area.

The values in the scale relate to the zoom level you see in the URL address of the web browser. Changing the zoom level alters the displayed scale.

Lat/Lon

In the lower-right corner is a control showing the latitude and longitude of the mouse pointer as it moves over the map.

Permalink

Directly to the right of the Lat/Lon Display is a chain link icon which is a link to the current map view and selected objects.

Template:Permalink

Panning and Zooming

• The keyboard shortcut Template:Key press will hide the Waze top banner bar and put the editor into "Fullscreen Mode"
• There are two ways to pan the map (move around the map)
  1. Click and drag -- click on an empty point in the map, hold down the mouse button, and drag the map in any direction.
  2. Keyboard arrow keys -- Template:Key pressTemplate:Key pressTemplate:Key pressTemplate:Key press
• There are several ways to zoom the map:
  1. Template:Key press and Template:Key press
  2. The zoom control in the map.
  3. Double-clicking any point on the map to zoom in one level and center the map on that point.
  4. using the mouse wheel "scroll up" to zoom in and "scroll down" to zoom out.
  5. On Macintosh with a track pad, drag left or right.
  6. Hold the Shift key down and then click and drag a rectangle on the map to zoom in to the rectangle

Objects are any of the things on the map that can be selected. They include point places, junctions, segments, area places, update requests, map problems, and place update requests.

Selecting objects

Selecting single objects

A single click on any object will select it .

• Selected segments, junctions, and places are highlighted in blue. Information about these objects appears in the Left Pane.
• Selected segments will show A and B labels on their junction nodes
• Selected Update Requests or Map Problems remain 100% opaque! while all other objects of the same type become partly transparent.
• Selected Update Requests, Map Requests, and Place Update requests display information in a dialog box.

Selecting multiple objects

Several segments may be selected at once in order to change properties of several segments at one time. There are to ways to select multiple segments. One way is to select the first segment, then use Template:Key press (MAC users:Template:Key press) to select additional segments. The second way is to use multi-select mode. Use the shortcut key Template:Key press to enter multi-select mode. Template:Key press each segment -- all will remain selected. To exit multi-select mode, use Template:Key press (or Template:Key press).

Geometry

Segments and area places have geometry, which means shape. You change the geometry by adding, deleting, or moving geometry nodes.

• to create a new geometry node, select the object. Hover the mouse pointer over the object to show the geometry nodes in white. Between the nodes, there will be a smaller point where a new geometry node can be created. Click and drag this point to create a geometry node.
• to delete a geometry node, select the object. Hover the mouse pointer over the object to display the geometry nodes. Press and hold Template:Key press and hover over the geometry node to be deleted.

Moving objects

point place

select the point place, then click and drag to the new position

segment geometry node

select the segment. Hover the pointer over the segment to display the geometry node. Click and drag either junction node or any of the geometry nodes to move the ends or change the shape.

area place geometry node

select the area. Hover over the area to display the geometry nodes. Click and drag a geometry node to change the shape of the area.

segment junction

select just the junction where two or more segment junction nodes are connected. Click and drag the junction. Any segment junction nodes connected to the junction will remain connected to the junction. His will change the shape of the segments.

Area place (entire area)

select the area. Click and drag the area place move handle to move the area without changing its shape.

Segment turn arrows

• red and green arrows for segments and U-turn.
• click to activate TBR for yellow arrow.

Additional map controls

junction creator -- creates a junction where segments merely cross

Where two segments cross each other one time at the same elevation, but are not connected to each other, select the two segments at the same time. The junction creator ico will appear. Click this icon to create a junction. The two segments will be cut into four segments, all connected to the new junction.

bridge creator -- creates a "bridge" from a four-way intersection.

At any junction, select two segments with identical information. The bridge creator icon will appear. Clicking the icon will join the two selected segments into a single segment, and increase the elevation of the new segment to one more than the max elevation of the two segments which were joined.

There are several types of permission.

Editing area permission

You can only edit objects within your editing area -- this includes segments, junctions, places. This also includes closing map problems and commenting on or closing Update Requests. You can only see User Requests inside your editable area.

Lock level permission

Segments and places can be locked. You can only edit these objects if they have a lock level less than or equal to your editor rank. You can only set turn arrows at a junction if every segment attached to that junction has a lock level less than or equal to your editor rank. Even if a junction has a segment connected to it locked above your editing rank, you can add or remove any segment you can edit at that junction. You can set the lock level anywhere between 1 and your editor rank on any segment or place you can edit.

Trusted place editor status

Level 1 editors need approval from a rank 2 or higher editor on all place edits. After 10 place approvals, they become trusted editors and their places no longer need approvals. Rank 2 and higher editors never need approval for their edits.

Closures permission and closure locking

Unless set otherwise by the local community, only level 5 and higher editors can create road closures. A segment that has a current closure cannot be edited until the closure has expired or been removed from the segment. So if a segment has lock level of 1, but a current closure, then it will require a rank 5 editor to alter the closure so that a change can be made to the segment. If the lock level of a segment is 6, only an editor with a lock level of 6 can add, remove, or alter closures on the segment.

Template:ReturnToEditingManual