New Zealand/RoadLabelNZ View history

Introduction

Editors are encouraged to follow these guidelines.

Road types

The following convention is the recommended way to label road types in New Zealand.

NOTE: When Labelling Freeways and Highways where possible avoid changes to, "Road Type", "City Name" and "Street Name" over many road sections.

For example routing from Cape Reinga to Wellington using only using "SH 1" label format, routing would be much improved if every segment was named exactly the same.

Freeway

Waze Road Type	Description	Road Shield Examples
Freeway (Motorway)	Freeway, motorway, and expressway. There must be no intersections and there must be no access or exits except from ramps. List of motorways and expressways in New Zealand.

Road Type: Freeway (Same as NZ Motorway)
City: N/A (Tick "None" Checkbox)
Lock: Level 3 (Note: Auckland is Level 4)
Name: <SH xx>

Code	WME Entry	Client Display
<SH xx>	SH 1

Major Highway

Waze Road Type	Description	Road Shield Examples
Major Highway	Are roads named from SH 1 to SH 99

Road Type: Major
City: N/A (Tick "None" Checkbox)
Lock: Level 3 for State Hwy 1, Level 2 for all other Hwy's
Name: <SH xx>

Code	WME Entry	Client Display
<SH xx>	SH 5 SH 1 - Clyde St
<SH xx>	SH 3a

Minor Highway

Waze Road Type	Description	Road Shield Examples
Minor Highway	Are Regional Routes

Road Type: Minor
City: N/A (Tick "None" Checkbox)
Lock: Level 2
Name: <TR xxx>" - "<Name>
Name: <UR xxx>" - "<Name>

Note: Text to Speach for

 TR = Tourist Route
 UR = Urban Route

Code	WME Entry	Client Display
<TR xx> <Name>	TR 72 - Geraldine-Winchester Hwy	Geraldine-Winchester Hwy
<UR xx> <Name>	UR 9 - Remuera Rd	Remuera Rd

Primary Street

Waze Road Type	Description	Road Shield Examples
Primary Street	Main Roads, Regional Roads, Tourist Drives, Scenic Drives, etc that are not classified as highways. They connect suburbs and towns.	N/A

Road Type: Primary
City: City Name
Name: Millwater Parkway
Lock: Level 2

Street

Waze Road Type	Description	Road Shield Examples
Street	Urban streets and rural roads not identified above. Use also when in doubt of proper street type.	N/A

Road Type: Street
City: City Name
Name: Streetname according to postal adress
Lock: Level 1

Locking Roads

Guide for locking

Locking should be used sparingly and carefully.

A special note on locking:

When creating a new road in an area not yet mapped area and locking it to a level above 1, you also may choose to add just one short segment of an adjoining road (handle) to create the junction and allow a lower level editor to connect the surrounding streets later without being blocked from editing.

Motorway Carriageway Naming Convention

Whenever possible, on split roads, name carriageways with the direction of travel. Insert the direction of travel at the end of the road name:

Examples:

SH 1
SH 10
SH 18

This makes traffic and incident reports much more useful and helps with navigation.

Exit and Entrance ramps (on/off ramps)

For the best balance between information and screen real estate, the following conventions are used. All ramps will be set as the 'ramp' type in the Waze Map Editor and be locked at the same level as the freeway which joins to them. The name of the road, route number (if applicable) and compass direction (for entrance ramps) should all be added for clear guidance to be given when using the Waze app.

Exit ramps

If the exit sign shows a number as well as a street or highway name, the exit ramp should be named. The hyphen gets transferred to "to" in the TTS

"Exit 424 B: Cook St"

The hyphen gets transferred to "to" in the TTS (Text-to-Speech)

If the exit is not numbered,

"Exit: SH 50 - Hastings / Wellington"

If a single exit serves multiple roads, use a slash with leading and trailing spaces:

"Exit: SH 50 - Hastings / Wellington"

If an exit number contains one or more letters, include it exactly as displayed on the sign:

"Exit 424 B C: State Hwy 16 (E) - Cook St / Port"

Include everything that is present on the last sign prior to the exit. Do not combine all possible pre-ramp signage into the single ramp segment name.

If the exit off the main interstate or highway serves multiple exits further down the road, it may be advisable not to name the first exit ramp, to name only the ramps which are the first one to a distinct destination. The Waze client will give all the proper exit and keep left or right instructions to guide the driver to the correct exit, even if the first one is not named. That said, this should only be done if the signage for the first ramp is the same as that on the subsequent, named ramp.

Examples

Exit: SH 50 - Hastings / Wellington
Exit 394: Whangarei via Orewa
Exit 424 B: Cook St
Exit 398: Silverdale
Exit: Service Centre
Exit 424 B C: SH 16 (E) - Cook St / Port

Entrance ramps

For entrance ramps, use this format.

Examples

Entry: SH 1 (S) - Auckland 
Entry: SH 1 (N) - Whangarei
Entry: SH 18 - Mtwy (E) - North Shore

Wayfinder Segments

It may be necessary to provide additional information to a driver for complex or confusing Exits and SplitsMore details here.

Wayfinder Naming Examples

SH 1 - Auckland / Whangarei
SH 1 - Auckland (S)
Exit 424: B C D - SH 16 (E) and (W)
SH 1 (S) - Manukau / Hamilton

Roundabouts

To aid navigation instructions, roundabouts should typically remain without a street name

City: enter either Primary City or tick "None"
Street: Tick "None"

- where the client comes across a segment with no name it will use the next named segment as the next named instruction whilst retaining any turn signals.

If the roundabout does have a proper, signposted name, then this can be labelled using a 'Junction/Intersection' type landmark that fills the centre of the roundabout.

For further advice, see Editing Junctions and Roundabouts

Search