Logging in
Be sure to select the appropriate server based on the part of the world you are editing.
- US and Canada: https://www.waze.com/editor/
- Rest of the World: https://world.waze.com/editor/
If prompted to login, use the same username and password as you do on the Waze client app and the rest of the Waze website.
Common Functions
All of the following sections use terms that are defined in the glossary for your clarification.
Layers
Show and hide the various layers (visual overlays) on the map by clicking on the 
icon at the top right side of the displayed map.
For more details on the available layers, see the map editor interface and control section on layers.
Create a Road
- Hover the mouse over the
button in the toolbar at the top of the page and click Road. - Click the mouse on the map at the point where you want to start the road segment.
- Move the mouse cursor along the path of the road and click the mouse to add a geometry node for each point that changes direction along the road.
- When finished, double-click (or shift-click) the last point to end the segment.
- Pressing ESC will abort the road segment creation.
- Be sure the road or roundabout actually exists before creating it.
- Each segment that is added must minimally have the Country and State information added to it or it will stay as a red line and not be seen in the live map after the next update.
For more detail on creating road segments, see Creating and Editing street segments.
Removing a road
- Click on a segment with the mouse
- Click the Trash Can icon in the toolbar or hit the Delete key on the keyboard
You can select and delete multiple segments at one time, but the keyboard Delete key will not work for that. You have to use the Trash Can icon and then confirm you want to delete those segments.
Connect roads
When drawing new segments, or moving segments around, the editor will auto-junction roads.
- For new roads, if you start and/or end the drawing on an existing segment, a junction is created
- For existing roads, if you move the end of a segment onto an existing segment, a junction is created
- If you move a junction to an existing segment, that junction is now part of that segment and any roads connected to that segment previously are all now joined together
Delete a Junction
A junction is a small blue diamond which connects two or more segments. Junctions with only two segments might seem unnecessary, but may actually have a purpose. Before deleting any two-segment junction be sure the junction is not present for one of these reasons:
- A change in the road name, city, state, or country.
- Part of a loop road preventing routing errors.
If you are certain the junction is not fulfilling one of the above purposes, then you can remove it with one of three ways:
- Click on the junction, and it will change to a blue dot with a green outline; then click the trash can icon, or use keyboard shortcut Delete or Del key (not backspace).
- Select segments on either side of the junction, and click the Bridge icon which appears over the junction. Note that this will also increase the level of the segments by 1, so this method is best used only when replacing an inadvertent junction with an overpass.
- The third option is not recommended, but if the segment is very short, you can select one junction at one end of the short segment to make it blue with green outline, and drag it to the other end of the segment. This method has three drawbacks: a) all road data will be lost from that segment, b) if there are geometry nodes on that short segment, they must be deleted first to prevent errors when saving, and c) the new junction will have turn restrictions not previously set that will need to be reviewed from each segment entering the junction.
Remember that all elements of the road name, city, state (where applicable) and country must match for the first two options to work. The third option would not care because it is effectively deleting the segment and merging the other two adjoining segments (which loses road data).
You will also find additional information related specifically to Overpasses, Underpasses and Bridges in that section.
Loop roads
When drawing a road which connects to the same segment at both ends, only the ending junction is created. To create the starting junction:
- Move the end of the new segment away from where it is
- Drop it
- Move it back to where you want the junction to be
When drawing a road segment that starts and ends at the same junction, the above may not work, and if it does, turn restrictions at that junction will be wrong. Split the looping segment somewhere along its length by following the instructions in Splitting a segment. Then join the remaining segment end to the common junction and apply normal turn restrictions.
Turn restrictions (allowed turns)
Review the information on soft and hard turn restrictions before reviewing the information below. This section will be updated soon to reflect these changes.
For details of how to set up time-based turn or time-based segment restrictions, please read the Scheduled Restrictions page.
Standard Turns
Set by selecting a segment which will allow you to see the connectivity arrows and modify these allowed turns at each end of the segment.
In General:
- A green arrow means Allowed
- A yellow arrow with a clock means Scheduled
- A red arrow with the circle-slash icon means Restricted
- Clicking an arrow toggles between Allowed, Restricted, and if a scheduled restriction is in place, Scheduled. Each arrow must be set correctly for Waze to route correctly.
A green arrow indicates that travel is allowed from the selected segment in the direction of the arrow.
When you hover the mouse over an allowed turn arrow, a small clock icon appears, which, when clicked on, allowed you to set scheduled turn restrictions.
A red arrow with the slashed-circle icon indicates that travel is not allowed (is restricted) from the selected segment in the direction of the arrow.
A yellow arrow with a clock icon indicates the presence of scheduled (time-based) turn restrictions.
The Purple question mark shows that the all the turns at that end of the segment have not been locked (confirmed) by an editor. Click any turn arrow to lock them. A purple question mark at the end of a segment is also referred to as a Soft Turn. Locking it, removing the purple question mark, makes it a Hard Turn.
A curved green arrow indicates that a u-turn is allowed in the manner and direction indicated by the arrow at that end of the segment.
When you hover the mouse over an allowed u-turn arrow, a small clock icon appears, which, when clicked on, allowed you to set scheduled u-turn restrictions.
A curved red arrow with the slashed-circle icon indicates that a u-turn is not allowed (is restricted) in the manner and direction indicated by the arrow at that end of the segment.
A curved yellow arrow with a clock icon indicates the presence of scheduled (time-based) turn restrictions for the direction indicated by the arrow at that end of the segment.
- The yellow dots which appear on selected segments indicate a segment restriction
- On a 1-way segment, yellow triangles are used instead of dots to denote a segment with restrictions
Where the arrows appear depends on the road. One-way roads will only have arrows at the end, and roads with unknown directionality will have no connectivity arrows at all.
U-Turns
Two-way segments will also show the small u-turn arrow icon at both ends of the segment. This is used, as its named suggests, to prevent/enable Waze to use a segment end node as a u-turn, in case of necessity. When setting the u-turn arrow to green, make sure that u-turn is possible AND LEGAL in real life. In any other case, set the arrow to red for drivers security. Just as with other turn restrictions, allowed u-turns must be set on a per-segment-per-end-node basis. This very granular control is required for quality route selection.
NOTE: The U-Turn doesn't have a proper navigation announcement (i.e. "Make A U-Turn"), but it will still route you that way. The current policy is to disable all U-Turns UNLESS the road is a divided highway that doesn't meet the requirements to be split.
U-Turns at the end of dead-end-streets
For the definition of a dead-end-street (or cul-de-sac, or court in the US), please read : https://www.waze.com/wiki/Junction_Style_Guide#Cul-de-sacs
When creating or editing dead-end-streets, please make sure that, at the end node, the small u-turn arrow is RED, with no interrogation mark.
Leaving a green arrow or a soft u-turn at the end node of such segments may result in confusing the routing engine. It may lead the drivers to drive up and down the dead-end-street needlessly.
In the following examples, the only correct edit is number 2 :
Please also remember that a dead-end-street must always be a 2-way street.
Turn restrictions Tips
- Press s to separate overlapping arrows.
- Press a to toggle connection arrows transparent or opaque so you can see beneath them and click items under them
If an intersection should not have any restricted turns, you can easily enable all turns. Initial turn restrictions on roads are set automatically by the Waze routing engine. Automatically set turns can be altered by the routing engine, but manually set turns cannot. Unfortunately both automatic and manually set restricted turns are represented by red arrows and cannot be distinguished. Currently when you use the option to enable all turns, it will not fully change the routing from automatic to manual for the turns. To clear the automatic routing for an intersection start by selecting the junction with the mouse. Then you can choose between mouse clicks or keyboard shortcuts. With the mouse, in the properties toolbox, click the link to "Disallow all connections" and then "Allow all connections". Alternately you can use the keyboard shortcuts by pressing the letter 'q' to disallow all connections followed by 'w' to allow all connections (see keyboard shortcuts).
To see all currently restricted turns for all intersections on the map press 'Shift+z', which will toggle between the turn settings for one selected segment and the turn restrictions for all intersections.
See the section set allowed turns for more information.
Selecting Multiple Segments
Some edits require that you select two or more segments of road. Other times, you want to apply the same change to multiple segments. In the default select mode, you must use the modifier key below:
- Mac: Command + Click
- Windows: Ctrl + Click
- Linux: Ctrl + Click
When in multi-select mode (keyboard shortcut m), you do not have to use the modifier key.
Create a roundabout
- Hover over the at the right side of the toolbar click on Roundabout.
- Click the map at the center of the roundabout.
- Move the mouse outward to the correct size of the roundabout.
- Click to finish.
- There must be roads that touch the roundabout when you click to finish, otherwise no roundabout will be created.
- Roundabout drawing is circular by default. Ellipse drawing can be enabled by holding down the Shift key while adjusting the roundabout size.
- Roundabouts can be created over existing junctions and segments. Any roads within the shape of the roundabout will be truncated, and any junctions within the roundabout shape are deleted.
- To delete a roundabout, you must delete ALL segments of the roundabout. You cannot save your work without deleting all segments of the roundabout. When saved, the roundabout node will also be deleted.
Create a Landmark
- Hover over the at the right side of the toolbar click on Landmark
- Click a point of the map on the edge of the landmark
- Move the cursor along the path and click to add a geometry node to define the shape
- Shift+click (or double click) anywhere to stop drawing and complete the shape
- Select the new landmark and define the type of landmark and a name in the Properties drawer
- The new editor has a different list of landmarks from the old editor. The new list is much shorter, clearer, easier to work with and includes some landmarks that were missing before (such as 'beach'). However, it is also missing some often-used landmarks from the past.
Bridge junction
- Select two adjacent segments which will be bridged together
- Click the
icon over the junction
- The properties of the segments to be bridged must be identical or you will not see the bridge icon
- Bridging automatically increases the level of the new merged segment by 1 more than the highest level of the two segments. You can change it, of course, if it needs to be a different level.
Generally if two segments can be joined, if you select the junction you can press the trash can icon to have them join as well. If the trash can icon does not appear, the segments are different in some way and that might be the reason there is a junction in the first place.
- For more detail, see Overpasses, Underpasses and Bridges.
Overlapping road junction
Two roads set to the same level which cross each other can be joined by an intersection easily. This is useful if you draw several new roads for a neighborhood by drawing segments from end-to-end and allowing new segments to cross each other. Once drawn, you can junction them using this method.
Both roads must be set to the same level. You can often use this method with unconfirmed (red) roads, but sometimes the editor will refuse to do this process until the roads are confirmed. Additionally, changing zoom level sometimes helps to get the sometimes-stubborn junction creator icon to appear.
- Select both segments
- Click the
which should appear above the intersection
- Note: The sign won't appear if the roads cross each other multiple times
- A junction is added
Splitting a segment
There are three options for splitting a segment, or adding a junction to the middle of a segment:
- Add a new segment from nowhere to the point of the segment you want to split. A new junction will be added. Delete the new segment just created.
- Add a new segment from the spot you want to split to nowhere. A new junction will be added. Delete the new segment just created.
- Disconnect one end of the segment. Draw a new segment from the segment end to the node it used to connect to.
In all these steps, the junction which was automatically added will remain.
Joining junctions
When joining or removing a junction, there are a few considerations that should be taken into account. Please review the more detailed article on junction removal.
Disconnecting a road
Select the segment. Drag the end you want to disconnect away from the junction.
Select entire street
- Select a segment
- In the tabs area, click the Select entire street button.
- Any segments connected to the first segment with the same properties will be selected and can be edited as a group.
- If there is a gap or a street with a different name or other different property, it will not allow the selection to go beyond it. You will need to edit in multiple passes in this case.
- Select entire street will not work with unnamed segments
Solve map problems
Map Problems in Waze Map Editor
Keyboard Shortcuts
Below are the default keyboard shortcuts. You can customize some keyboard shortcuts by bringing up the keyboard shortcuts help window (with ? key), select a shortcut and then tap the shortcut you want to use instead. This affects the current browser and computer only. This shortcut information is not stored on the server, so you would have to repeat this for each computer and browser you use.