Revision as of 05:19, 30 June 2015 by Citeman(talk | contribs)(Created page with "{{ReturnTo | Editing manual | the editing manual}} This page covers editing house numbers in Waze Map Editor. ==Overview== Waze keeps its own internal database of addres...")
Waze keeps its own internal database of addresses, or what is called House Numbers. These addresses are used when a specific address is searched from the Waze Map Editor or Waze client app. House Numbers are independent from any other address or mapping provider.
House numbers are points on the map and can be adjusted at a fine level of detail to ensure Wazers are properly directed to the correct location for that address. It is therefore important to pay attention to all details regarding house numbers to ensure proper routing.
How House Numbers are Used by the Client App
Current understanding, indicates that address (house number) search results are provided by a variety of sources, including: Google Maps data, Waze House Numbers, and Waze Places. When a Wazer searches for an specific address (house number) in the Waze app, the returned routing pin location uses the following hierarchy:
If there is a residential (private) place with that specific number, the place location is routed to the closest segment.
If there is a confirmed Waze house number or editor added house number, the house number stop point location is routed.
If there is a Google Maps match the GPS location is mapped and the closest segment is routed.
If there is a not-confirmed (imported) Waze house number, the house number stop point location is routed.
Note: As of <date>, Public Place address location (house numbers) are not searched; Public Places are only searched for by Name or Category. See Places
Things to remember (caveats/warnings)
The House numbers interface cannot be activated when there are unsaved edits.
House numbers are editable only at the 100m/200ft zoom level and lower.
House numbers cannot be added to segments without a name.
A segment cannot have its name removed if there are house numbers attached to it.
House numbers can contain numbers and letters (But cannot start with a letter).
The Waze app address search will only use the Waze house number if it has been created in the editor, or has been modified (moved).
The Waze app does NOT automatically update position data for already-obtained destinations! Even after an address has been adjusted using WME and/or Google MapMaker, the app will retain the stale position data indefinitely and navigation will continue to fail. To eliminate stale position data, ask the reporter to remove any existing instances of the destination in the recents and favorites lists and then search for the destination again from scratch.
If an address is on an unnamed road (private, parking lot, etc.) and the marker is a long way from the actual house location, delete the Waze house number and add a private residence Place marker which contains only the address.
If the correct approach entrance to an address is from a street or segment other than the street the address is named after, then a Waze House Number for that address should not be used. Instead, add a private residence Place marker which contains only the address.
Waze will not be doing any future imports or merges of external data for house numbers. It is therefore very important that any new roads you add must have house numbers added in order for Waze to provide accurate routing to those addresses.
Activating the interface
To edit, update or delete house numbers on a street, select any segment of the road then click the Edit House Numbers button or tap the Hkeyboard shortcut.
Note: The House Numbers interface cannot be activated when there are unsaved edits or multiple segments selected.
Using the interface
View of house numbers and default distance highlighting.
Waze will often select an additional segment or two connected to the segment you selected when they are the same city and name (same Street ID). You can pan the map along that selection to edit house numbers on more than just the single segment you selected.
The lighted area around the road is the default distance that house numbers are allowed from the street. If a house number must be located beyond that distance, you will need to Force the house number into place (discussed below).
Note: If you are zoomed out farther than 100m/200ft, you cannot edit house numbers, and there will be a message at the top center of the window which reads, "Zoom in to edit"
Toolbar
When the house numbers interface is activated, a new toolbar appears with the standard complement of action buttons specific to working with house numbers.
Descriptions of the house numbers toolbar buttons:
Click to add a new house number
Click to save current changes to house numbers
Click to undo the last house number action or modification
Click to redo the last house number action or modification
Click to exit the house numbers interface
Markers
The two images to the right show what a house number looks like in the editor. Which one is used depends on the density of house numbers and how WME determines the marker should be flipped for best visibility and handling.
The red "X" is the delete button.
The blue dot on the other side is the drag handle
The house number itself should be placed the center of the rooftop of the house. For large buildings such as box stores which have a single address, and addresses within shopping malls, it is recommended to NOT add the house number to Waze. These stores are typically within parking lots and the stop point for house numbers is not a good location for navigation to end. For these locations, use a Place area or point.
Modifying
To Edit a house number, click in the number and enter a new number.
To Move a house number, click in the number or on the blue drag handle, and then click and drag using the blue drag handle.
To Delete a house number, click in the number, and then click the red X.
Adding
To add a house number, click the Add button on the toolbar or taph on the keyboard. Click on the location of the house or business address. Enter the house number.
Setting the Stop Point
The Stop Point (sometimes referred to as the Segment Marker) is the location on the segment to which the house number is attached, and this is where the Waze navigation destination will be set in the client app. This is represented by a white dot with a blue outline attached to the street:
When moving a house number or adding one, you will see a dashed white line leading to a white dot on the road you selected. This white dot is the Stop Point for navigation to that house number. It can be moved anywhere on the named segment for that address. It cannot be moved to any other segment including driveways (at this time).
The Stop Point should be placed:
where you would park if you wanted to park closest to the main entrance to the building or an entrance to the building parking lot.
where the driveway intersects the road. For houses with driveway which intersects the same road more than once or two different roads, put the stop point where the mailbox is located
Think of it this way: "If you can get the driver to this point and have the app display a directional marker flag and announce the correct side of the road the destination is on, the driver should be able to figure out which building it is."
Note: if you have aerial images turned off, such that the background screen is white, you will not be able to see the dashed line. Because it's white.
The Waze development team is working on a way to specify a stop point on a street other than the named segment to which the address is attached. This is important for any house whose driveway may not be on named street, mall location, unnamed long private streets/drives with multiple addresses, or businesses which have an entrance from a parking lot off the named street. At this time, there is no way to guide the drivers within a parking lot.
Errors
There are two categories of errors related to House Numbers:
Errors you can force
Errors you cannot force
Errors you can force
When the error message pops up:
Dismiss it by clicking on Continue editing
Hover the mouse over the red-bordered House Numbers to review what the errors are
Fix the House Numbers which are in error, if they are indeed in error.
The following errors can be forced if you are a Level 3 or higher editor:
Number too far from segment : House Number is beyond the standard allowed distance from its segment.
Number out of sequence : House Number stop point doesn't align with existing house numbers on the segment.
Number already exists : House Number already exists somewhere on the same selected segments.
Wrong side : House Number doesn't align with other existing ones for odd/even numbering scheme.
When you are fully confident there are no errors with any of your House Numbers after you have reviewed the House Numbers highlighted as being in error, click the Save button and then click the Force button.
Errors you cannot force
You will need to fix the errors in order to save. The following errors cannot be forced:
Unsupported number format : House Number contains too many numbers, or has letters or other characters which do not align with the allowed format for the country.
House Number Tips
Forcing of House Numbers is currently limited to Level 3 editors and higher.
The wrong side and out of sequence errors are often a problem in a cul-de-sac or court where stop points for houses tend to bunch up at the end of the street, and the exact position of the segment must align between the house number sequence or odd/even switch (in those countries which follow this method)
Another common out of sequence error occurs on circular roads with multiple segments. A junction node should be placed at the point where the sequence starts as the interface can only "start" a sequence at a node. For example, if a sequence of house numbers on a circular road runs from 50 to 250, then a junction node must be located between the stop points of 50 and 250 in order to avoid the need to force.
For an address which must be moved beyond the normal accepted distance, when you Add it, it must first be placed within the highlighted area, and once the number is entered, then you can drag it to the correct location and adjust the stop point as necessary.
If you have more than one which requires forcing, only one click of Continue editing will force them all. Be sure you are confident that all are correctly located.
When a house number has been forced and saved, it will display differently than other house numbers, with the word "Forced" included in the marker as shown to the right.
House Number changes are not enough to force a Tile Update. Physically change something (preferably delete an unnecessary geometry node) so the Tile will update and the changes will publish. Search House Number Node in the forums for supporting info.
Remember to save
Before you tapEsc on the keyboard or clickClose, remember to Save your changes.
