User:Subs5/Restrictions

Segment restrictions

The segment restriction method changed in 2017. Some attributes changed location in the editor and some new ones were added.

====Selecting a segment====

1. Select a segment so that the name appears to the left of the map editor.
2. Select the yellow Add restrictions (Time Based Segment Restrictions) on the left panel when the segment is selected.
3. It will be Edit restrictions(#) if there is already a restriction(s) on the segment.

   

4. First restriction pop-up window appears

   

First pop-up window

Toll

There are two ways to mark toll:

1. Toll attribute in bottom left corner of the first TBSR popup window
2. Toll free restriction is enabled in second TBSR popup window

Toll attribute check box

The toll attribute check box has moved to the first pop-up window of a segment restriction. It used to be under the segment's road type.

1. Check the toll road attribute in the bottom left corner of the popup box

   

2. Mark a road segment as a toll segment only if the segment has a toll booth, transponder reader, or other tolling device and if no vehicles travel as toll free on that segment.
3. Once a segment is marked as a toll segment then the toll attribute is displayed under the road segment name. You have to go to the TBSR to deselect the attribute.
4. Designating a segment as toll will prevent setting any vehicle type as toll free.
5. Designating a two way segment with the toll attribute will designate both directions as a toll road. Designating a one way segment with the toll attribute will designate that direction as a toll road.

Toll by default (toll free designation)

1. If there are any vehicle types that are designated toll free on the segment, then any allowed vehicle that is not designated as toll free is assumed to pay a toll.

   

2. Note the toll free vehicle must also be listed in the allowed restrictions too.

   

If a vehicle type is not listed in the allowed section then Waze assumes it is prohibited and will not check for the vehicle’s toll free designation. In short Waze thinks the vehicle type is prohibited and it can't be routed there as a toll free vehicle since it is prohibited. In the example above only private vehicles are allowed on the road segment as a toll road. Private vehicles that the user designates as HOV-2+ will be allowed to use the road toll free. All other vehicle types are prohibited.

If a vehicle type is designated as toll free why doesn't Waze just recognize that they are allowed? There are notes in the restriction popup windows that impart this knowledge.

1. Hover over the small blue lower case i in the toll free restriction and a black box pop-up appears that says "Vehciles must also meet all of the "Allowed" restrictions".

   

2. Orange note in bottom left of Allowable restriction says "Other vehicles are restricted" (i.e. prohibited)

   

Selection of direction

1. First restriction pop-up window has three main items:
   • A > B
   • B > A
   • Two way
2. Restrictions have three main Types

   

   • Allowable
   • Toll free
   • Prohibited
3. Restriction Types are added as Lines under the applicable direction(s) of travel.

   

   • The picture to the right has three Lines of restrictions; one each of Allowed, Toll free, and Prohibited
4. Restriction Lines contain Rules which are partially displayed in the Summary; rules are fully described below
5. Click the grey Add new box under the appropriate direction for the restriction to be entered
6. Second restriction pop-up window appears

   

Note

1. Each restriction Type on the first pop-up window is compared to other Types as an AND statement.
2. Each restriction Line on the second pop-up window (within the restriction Type) is compared to other lines in that restriction line as an OR statement.
3. Each restriction Rule within a single restriction Line is compared to other rules as an OR statement

So for the three restriction lines in this photo:

1. • a) All Private vehicles are allowed as tolled vehicles
   • b) Private vehicles that are HOV-2+ are allowed as toll free vehicles
   • c) All vehicles are prohibited from 00-02
   • d) Since HOV-2+ is a subset of private vehicles, it does not have to added as a separate allowable restriction; the allowable restriction for all private vehicles includes private vehicles and HOV-2+

A vehicle is allowed as toll free, if it is a) a private vehicle AND b) a private vehicle with HOV-2+ AND c) Not being routed 00-02. A vehicle is allowed as tolled, if it is a) a private vehicle AND b) Not being routed 00-02. All vehicles are not allowed if it is 00-02.

Because the restrictions only include private vehicles, any user that has selected another vehicle type, ex taxi, will not be routed on the segment. Taxis are not part of the allowed vehicles so they are assumed to be prohibited. Remember the Orange note in bottom left of Allowable restriction says "Other vehicles are restricted"? This is how that note affects routing.

A user that selects avoid toll roads will not get routed here unless they signify that they are HOV-2+ (once HOV is pushed to production). They have selected to avoid toll roads, but the road is toll free if they have HOV-2+.

Second pop-up window

The second pop-up window has the label of Add restriction in the top left corner.

====Second pop-up window====

The second line will display Driving both ways (N/E/S/W/NE/SE/SW/NW if one way) on [name of segment] is restricted on. There are several attributes that can be selected for the restriction:

1. Applies to
2. Days
3. Hours
4. Applies
5. Restriction Type
6. Additional information text box

=====Applies to=====

This section has two selections portion of the segment and type of special routing.

1. Portion of segment selections are:
   • a) Entire segment
   • b) Left lane
   • c) Middle lane
   • d) Right lane

Select the appropriate portion of the segment. Note Waze can differentiate the speed difference between the lanes on a segment for the Bus/Express/FAST/HOT/HOV lanes that are separated by a dashed line from regular lanes. This does not work for the individual lanes on a road to tell you which lane is fastest when they are all the same type of road.

=====Specialty road type=====

This attribute is used to distinguish regular (none) road segments from

1. Specialty road type selections are:
   • a) None
   • b) Bus
   • c) Fast
   • d) Express
   • e) HOT
   • f) HOT
2. None is the designation for the vast majority of roads; if a road does not have a specialty designation then it is a regular road and should have None selected.
3. The other designations of Bus, Express, Fast, Express, HOT, HOV are used based on the local usage. The specialty road type has to be selected to get the proper routing for that type of road. As of October 2017 there is no difference in the designations, but there will eventually be different voice prompts for the various types; therefore set the road up with a consistent usage based on what the locals call the road type.
4. For the special designations EVERY RESTRICTION LINE on the segment should have the same specialty road type designation. If you have an HOV road that has one segment in the middle that is selected as None then the algorithm will not work properly.
5. When multiple segments have different orientations of A>B and B>A in one selection, they may have the restrictions saved in opposite directions. This is a bug that developers are working to fix. Till it is fixed then you should carefully check each segment to ensure the restriction is in the proper direction. For one way road segments if the restriction is in the opposite direction the light orange dotted road will not be displayed; unfortunately two way road segments or one way road segments with multiple restrictions do not have a simple way to see that a restriction is in the reverse orientation.

Days (of week)

Select the applicable days of the week that the restriction will be active. Use the Select all or Select none link to more quickly change all the check boxes. The default is all days of the week. Your display order for the days will depend upon your country settings in your browser and may not exactly match the image above. Mon-Fri and Every day are the most common restriction groupings in USA.

Hours (of day)

Select the applicable hours of the day that the restriction will be active. For restrictions that apply all day long, use the default setting of All day. If the restriction is for only certain periods of time during the day, then deselect the All day radio button to allow the time to be changed. You can click the hours or minutes fields to enter times directly, or click the clock icon next to the time to enable input panels. The schedule uses a 24-hour notation. The restriction will start at the beginning of the minute designated in the start block. The restriction will go till the 59th second of the minute designated; so if you state an end time of 08:00 it goes till 08:00:59. So if a posted restriction ends at 08:00 it is advisable to end the waze restriction at 07:59; this will have the 08:00 time enacted vice carrying the restriction over for an additional minute. If the end time is selected after 23:59 then the restriction will carry over till the next day.

24-hour time	12-hour time
00:00 (midnight)	12:00 AM
01:00	1:00 AM
02:00	2:00 AM
...	... AM
10:00	10:00 AM
11:00	11:00 AM
12:00 (midday)	12:00 PM
13:00	1:00 PM
14:00	2:00 PM
...	... PM
22:00	10:00 PM
23:00	11:00 PM

In a 24-hour format, time is represented with unique hours of the day that do not require the AM and PM indicators. To convert from 24-hour time to 12-hour time (or vice versa), use the table on the right.

The minutes remain the same between the two formats.

Alternately, you can use the following math to convert from AM/PM to 24-hour format:

• For AM times, use the time directly: 8:45 AM = 8:45 (in 24-hour format)
• For PM times, add 12 hours to the time: 8:45 PM = 20:45 (in 24-hour format)

For example, a schedule of 10:00 AM to 3:00 PM is entered as 10:00 to 15:00; a schedule of midnight to noon (12:00 AM to 12:00 PM) is entered as 0:00 to 12:00. A schedule of 3:00 PM to 5:00 AM is entered as 15:00 to 05:00.

The time that should be entered is the local time of the road as on the local signs. The Waze server knows the local time zone and will schedule the restriction correctly.

Daylight savings time is automatically accounted for as long as the Waze client app is properly set to the correct local time.

Entering midnight

If a scheduled restriction is between 8:00 PM and Midnight, then enter "20:00 - 23:59". Technically if you enter "20:00 - 00:00" it will go to 00:00:59 but is more or less an equivalent result.

Crossing midnight

If a restriction occurs only during nighttime hours and opens in the morning, e.g., restricted between 10 PM and 5 AM, then enter the From time as 22:00 and the To time as 05:00. You will notice an information box that says the restriction will end of the following day. If this restriction is only on a certain day of the week, e.g., Saturday night and Sunday night, then select the day of the week for Sat and Sun matching the start of the restriction. There is no need to include Monday because it is automatically covered. Including the Monday check box would add a third day starting at 10 PM Monday.

Applies

The default setting is Every week meaning there is no limit to the date range so as soon as you add the restriction it will be active every week until it is removed. Optionally you can select the radio button for Range of dates to limit the restriction to a certain number of days. Press the button displaying the date to display two calendars. The one one the left shows the start date and the calendar on the right shows the end date of the restriction. Note these date are inclusive meaning the restriction will include both dates (and all the ones in between) when determining the restriction. When you have selected the date range press the green Apply button. The date range is displayed in DD/MM/YYYY format. To remove the date range, simply select the Every week radio button again.

Remember that the end date will consider the entire day based on any time settings also configured. If the time crosses midnight, the next day will automatically be included for that time period and so that the restriction ends at the appropriate time.

Restriction types (Allowed/Toll free/Prohibited)

1. Select toll free if free for HOV vehicles, restriction's background color should change to blue

   

2. Select Minimum passengers by clicking the + on the blue add restriction banner and a drop down menu will appear

   

3. At least 2 passengers is added

   

4. Select number of passengers required by clicking the At least 2 passengers and a drop down menu will appear with selections for At least 3 (4) passengers
5. If toll free, then skip to step 24
6. Click the + again while remaining on the same restriction as the number of passengers to select Requires a pass
7. Sunpass is added to the restriction line

   

8. Click the Sunpass area and a drop down menu will appear with available companies
9. Select the applicable transponder company
10. Click Add button in bottom right corner
11. Click Save icon on the light blue waze bar
12. If HOV lane is only for part of the day, Open to all rest/part of day, or Reversible lane then set appropriate prohibited restriction(s)

    

13. Make sure one restriction period is added for the segment(s) then add additional restrictions till all appropriate times are added for one direction
14. If a reversible segment, then add the appropriate time and restrictions for the opposite direction

Note be sure to add the Driving is Prohibited period(s) if a reversible lane does not allow traffic to prevent misrouting.

Additional information

This is a text box that can be used to describe the restriction or put in a source (web page) of the restriction information.