View source for USA/Northeast/2017-Meetup-Planning/MapRaid View history

The 2017 Northeast Meetup MapRaid will begin on July 9<sup>th</sup> 2017 at _:00 AM EDT and continue for one week through July 16<sup>th</sup> 2017 at _:00 _M EDT. The raid will be divided into 4 groups, with group assignments to be determined at the meetup.

=== MapRaid Goals ===

The primary goals of the Meetup Raid are to
# Complete missing FC classifications,
# Correct state and county route names to standard, and
# Ensure turns are enabled and confirmed along these routes.
The primary goals can often be completed in tandem. While updating state route or county route names, their FC classification can be updated and their turns confirmed. Note: In some urban areas, there may be roads requiring FC upgrades that are not state or county routes.

Secondary goals are to
# Update hospitals from "Doctor / Clinic" to "Hospital / Urgent Care" category,
# Complete and confirm speed limits,
# Update gas stations, and
# Complete general basemap confirmation and cleanup.
If you are unsure if the items are completed, please contact your [[#Raid Groups|Group Leader]].

=== Raid Areas ===
{{#widget:Iframe
|url=https://www.google.com/maps/d/embed?mid=1hIjKufcDh_qoyiLTu33Ak4fYIjA
|border=1
|width=100%
|height=500}}

=== Raid Groups ===

Group assignments and leadership for the four groups will be assigned at the meetup. 

=== Meetup Raid Hosts ===
* Raid coordinator
** {{username|whoaitspete}}  - NY LAM

==Local Guidance==
In addition to the guidance listed below, please see the [[usa:New_York|New York Wazeopedia]] page for additional information and the full set of state editing standards.

===NY Route Name Variations===
*New York State uses NY-## and NY-##X for all state routes and their spurs, loops, etc. (e.g. NY-27, NY-17M)
*For County Routes, CR-## and CR-##X are used (CR-1 or CR-21B)
**County route primary names vary from county to county. The primary name should match the LGS and not the country route (blue) shield. CR-XX from the route shield should be used as an alternate name. Some counties will use only CR-XX on their LGS, in which case that is the primary name and no alternate name is necessary. Please consult the [[usa:New_York/Resources#County_Route_Inventories|county route inventory sheets]] for naming, but ensure they match LGS as well.
*Highway name descriptors, such as TRUCK, EXPRESS, etc. should be added in ALL CAPS after the name. (e.g. US-1 TRUCK, or on a concurrent road US-1 TRUCK / US-9 TRUCK)

=== Functional Classification ===
'''Tip:''' for editors using the [http://www.waze.com/forum/viewtopic.php?f=819&t=95473 FC Color Highlights] script: These colors will more-or-less match the NYS DOT FC map:
{| class="wikitable"
|+ NYS FC GIS Color Highlights
|-
! NYS FC Type !! Highlight Color
|-
|{{Road|style=Color:White; Background-color:Black;|Interstate {{=}} Fwy}} || black
|-
|{{road|style=color:white; background-color:green;|Principal Arterial {{=}} MH}} || green
|-
|{{road|style=background-color: red;|Minor Arterial {{=}} mH}} || red
|-
|{{road|style=color:white; background-color: blue;|Collector {{=}} PS}} || blue
|-
|{{road|style=color:white; background-color:#8c6946;|Ramp}} || #8c6946 (unclassified)
|}

=== NY Minimum Road Lock Standard ===
{| class="wikitable" style="text-align:center"
!colspan="3" style="background-color:#6699cc"|Minimum Road Lock Standard
|-
|style="font-weight:bold; background-color:#ccffcc"|Segment Type
|style="font-weight:bold; background-color:#ccffcc"|Lock
|-
|{{Freeway|Freeway}}
|5
|-
|style="background-color:#CEE0F2"|{{Ramp|Ramp}}
|style="background-color:#CEE0F2"|Highest Rank of Connected Segment
|-
|{{Major Highway|Major Highway}}
|3
|-
|style="background-color:#CEE0F2"|{{Minor Highway|Minor Highway}}
|style="background-color:#CEE0F2"|3
|-
|{{Primary Street|Primary Street}}
|1 (Auto)
|-
|-
|style="background-color:#CEE0F2"|{{Street|Street}}<br>{{Private Road|Private Road}}
|style="background-color:#CEE0F2"|1 (Auto)
|-
|-
|{{Railroad|Railroad}}
|2
|-
|style="background-color:#CEE0F2"|{{Ferry|Ferry}}
|style="background-color:#CEE0F2"|5
|-
|}
Note that these are minimum lock levels. Certain segments may be at higher lock levels for protection or due to old standards. If you find a road locked to a higher level than its minimum, please consult a senior editor to determine whether to leave it locked at that level or if its level can be lowered. NYC has a different locking standard, but this area will not be included in the MapRaid.

== Reference Links ==

=== New York Wazeopedia Page ===
If you have any questions regarding NY standards during editing and you cannot find the answer on this page, please visit the [[New_York|New York Wazeopedia Page]]. A number of mapping resources for the state can be found on the [[New York/Resources|New York Mapping Resources Page]].

=== New Editors ===
If you are new or relatively new to map editing, please [[West_Virginia/Resources|CLICK HERE]] for some tips to get started; including settings, options, scripts, Wiki References, and instructions on lock requests and how to create a Permalink (PL). You do not need to join the NY GHOs, you will be given an invitation to map raid specific GHOs. 

=== Basic US Wazeopedia Links ===
*[[Waze Map Editor/Welcome|New editor welcome page]]
*[[Waze Map Editor]]
*[[Best Map Editing Practice]]
*[[Editing manual]]
*[[Common editing mistakes]]
*[[Permalink|How to make a Permalink]]
*[[Community Plugins, Extensions and Tools]].

=== Recommended Tools for the Meetup Raid ===
New editors should be aware there are many scripts and extensions that editors use to assist with editing that not only make some jobs easier, but verifies what we do is correct.  The use of these scripts is highly encouraged and those listed below are the ones you should install, at a minimum, to get started. 

'''TamperMonkey / GreaseMonkey'''

The most common and supported browser is Chrome with Firefox a close second. Install the appropriate one for your browser. This is needed to install other scripts.

* [http://chrome.google.com/webstore/detail/tampermonkey/dhdgffkkebhmkfjojejmpbldmpobfkfo?hl=en TamperMonkey (Chrome)]
* [http://addons.mozilla.org/en-US/firefox/addon/greasemonkey/ GreaseMonkey (Firefox)]

'''Validator'''

This script validates a map area in Waze Map Editor, highlights issues, and generates a [http://www.waze.com/forum/viewtopic.php?f=819&t=76488&start=110#p671943 very detailed report] with wiki references and how-tos.
* [http://chrome.google.com/webstore/detail/wme-validator/baojhpeknpmkhplkcnpdcficcaaniaih Chrome Web Store] 
* [http://greasyfork.org/scripts/1571-wme-validator GreasyFork.org for FireFox] 
'''Temporary Fix to Get Validator Working'''

Once you have installed Validator, you will need to install the following script into Tampermonkey:

[https://dbcm.github.io/waze/valfix/valfix.user.js Validator Fix Script]

Then you will need to set it to Position #1:
# Go To '''Tampermonkey Dashboard'''
# Click '''Installed Userscripts''' Tab
# Click On '''Waze Map Editor - Validator Fix'''
# Click On '''Settings'''
# '''Set Position to #1'''
# Hard Refresh in WME
Install [https://greasyfork.org/en/scripts/12793-wme-validator-localization-for-new-york WME Validator Localization for New York] script to add three additional NY-specific permalinks. More information can be found on [https://wazeopedia.waze.com/wiki/USA/New_York/Validator this page].

'''Toolbox''' 

* [http://chrome.google.com/webstore/detail/wme-toolbox/ihebciailciabdiknfomleeccodkdejn?hl=en For Chrome]
* [http://gitlab.com/doctorkb/wme-toolbox-public/raw/master/Dist/Firefox/wmetoolbox.xpi For Firefox]

'''Meetup MapRaid Overlay'''

[https://greasyfork.org/en/scripts/30990-wme-northeast-meetup-mapraid-2017-overlay This overlay script] (requires TamperMonkey / GreaseMonkey) displays the boundaries of each raid group. It also adds a label to the map describing which group and county you are currently viewing in the editor. (Credit: Joyriding)

'''Place Browser'''

Use the [https://w-tools.org/PlaceBrowser?group=MeetupNortheast2017 MeetUp MapRaid! Northeast 2017 Place Browser] to review and fix all places. Areas are broken down by group and county. This tool lists all places in the specified area, and flags some things that MIGHT be problems. It is up to you to decide what to do with this information. Be sure to apply the global, national, and local guidelines for places. Be sure to click the About tab to get an overview of the tool. (Credit: Joyriding)

'''Other Recommended Scripts'''

# If you are working on places, install [http://www.waze.com/forum/viewtopic.php?f=819&t=133650&start=60#p1548089 WME Closest Segment] . It helps you determine the closest segment to the navigation stop point of a place. A line is drawn from a selected place (for point places) or its navigation point (for area places) to the nearest segment.
# [http://www.waze.com/forum/viewtopic.php?f=819&t=61926&start=50#p735439 WME Junction Angle Info] . This script helps with junction maintenance. If two connected segments are selected, it shows the turn angle, and estimates navigation instructions. Otherwise it shows the the angle between each segment.
# [http://greasyfork.org/en/scripts/18089-wme-simple-permalink-from-wme-keepmylayers WME Simple Permalink]. Shortens WME permalinks by removing any layer and filter specifications.
# [http://github.com/WazeUSA/WME-Place-Harmonizer/raw/master/WME-Place-Harmonizer.user.js Place Harmonizer (WMEPH)]. Harmonizes, formats and locks a selected place. Also for Chains, please Submit New Chain Data for any that are not in the database. '''NOTE: Now Available for all editors, including R1!''' 
# When working with House Numbers (HN), please use this script by '''JustinS83'''. It highlights un-nudged house numbers. [http://greasyfork.org/en/scripts/21779-wme-hn-tool-justins83-fork WME HN Tool (JustinS83 fork)]
# [http://greasyfork.org/en/scripts/19941-waze-edit-count-monitor Edit Count Monitor] will add a counter to the top "blue" bar. This script will show you how many edits you have and will also turn Yellow for a warning, and Red to alert you if you are being throttled.